SubCategory JCP = Job ControlSeverity Severity 3 (Informational)Trap/EventID FALSELCD Message No LCD message display defined.Initial Default. FALSEFilterVisibility IPMI Alert SNMPAlert EmailAlert LC Log LCD Power Off PowerCycle ResetFALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSEJCP008Message Job completed with errors.DetailedDescriptionMultiple attributes were set in the operation but some set attribute actions were notsuccessful. For example, setting an attribute that is not valid for the component beingconfigured,RecommendedResponse ActionExamine the results of the configuration job in the Lifecycle Log for the source of the errors.Modify the settings as necessary and resubmit the job.Category ConfigurationSubCategory JCP = Job ControlSeverity Severity 2 (Warning)Trap/EventID FALSELCD Message No LCD message display defined.Initial Default. FALSEFilterVisibility IPMI Alert SNMPAlert EmailAlert LC Log LCD Power Off PowerCycle ResetFALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSEJCP011Message Invalid parameter value forarg1Arguments •arg1 = parameterDetailedDescriptionThe value provided for the specified parameter is invalid and must be corrected for the invokedmethod to complete successfully.RecommendedResponse ActionTo provide the correct value for the specified parameter, see Lifecycle Controller-RemoteServices documentation. Retry the operation requested with corrected value.Category Configuration319
