LCD Message No LCD message display defined.Initial Default. LC LogFilterVisibility IPMI Alert SNMPAlert EmailAlert LC Log LCD Power Off PowerCycle ResetFALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSESWU8548Message Unable to update the Standby CMC firmware. The Image was not accessible.DetailedDescriptionThe firmware update operation of Standby CMC was not successful. The firmware image couldnot be accessed.RecommendedResponse ActionMake sure that the CMC firmware image file is available at the location specified in theoperation, and then retry the operation.Category UpdatesSubCategory SWU = Software ChangeSeverity Severity 2 (Warning)Trap/EventID FALSELCD Message No LCD message display defined.Initial Default. LC LogFilterVisibility IPMI Alert SNMPAlert EmailAlert LC Log LCD Power Off PowerCycle ResetFALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSESWU8549Message Unable to update the firmware of Standby CMC and Active CMC. The checksum process wasnot successful.DetailedDescriptionThe firmware update process of Active CMC and Standby CMC was not successful, because ofa firmware image checksum error.RecommendedResponse ActionReacquire the Image file from the source location, and then retry the operation.Category UpdatesSubCategory SWU = Software ChangeSeverity Severity 2 (Warning)Trap/EventID FALSELCD Message No LCD message display defined.Initial Default. LC Log810
