FilterVisibility IPMI Alert SNMPAlert EmailAlert LC Log LCD Power Off PowerCycle ResetTRUE FALSE TRUE TRUE TRUE TRUE FALSE FALSE FALSEPDR60Message Error occurred onarg1:arg2.Arguments •arg1 = physical disk•arg2 = error codeDetailedDescriptionThe reason for the error can vary depending on the situation. The firmware error code isindicated in the message.RecommendedResponse ActionVerify the health of attached devices. Review the Lifecycle log for significant events. Replacefaulty hardware, if required. Make sure the cables are attached securely. Refer to the storagehardware documentation for more information on checking the cable connections.Category StorageSubCategory PDR = Physical DiskSeverity Severity 2 (Warning)Trap/EventID 4346LCD Message No LCD message display defined.Initial Default. SNMP Alert;#LCD;#Remote System LogFilterVisibility IPMI Alert SNMPAlert EmailAlert LC Log LCD Power Off PowerCycle ResetTRUE FALSE TRUE TRUE TRUE TRUE FALSE FALSE FALSEPDR61Message The rebuild ofarg1failed due to errors on the source physical disk.Arguments •arg1 = physical diskDetailedDescriptionIt is not possible to rebuild data that resides on a defective disk.RecommendedResponse ActionReplace the source disk and restore data from backup.Category StorageSubCategory PDR = Physical DiskSeverity Severity 1 (Critical)Trap/EventID 4345458
