| 
USING THE IPMI TOOL SETEATON Managed ePDU User’s Guide 164201xxx Rev 1 DRAFT 10−OCT−2008 99Table 8. Valid Set Channel Parameters (continued)DescriptionParameterauth Sets the valid authtypes for a given auth level Levels: callback, user, operator, admin Types: none, md2, md5, password, oemcipher_privs Correlates cipher suite numbers with the maximum privilegelevel that is allowed to use it. In this way, cipher suites can berestricted to users with a given privilege level, so that, forexample, administrators are required to use a stronger ciphersuite than normal users.The format of privlist is as follows:Each character represents a privilege level and the characterposition identifies the cipher suite number. For example, the firstcharacter represents cipher suite 1 (cipher suite 0 is reserved),the second represents cipher suite 2, and so on. Privlist must be15 characters in length.Characters used in privlist and their associated privilege levelsare:x Cipher Suite Unusedc Callbacku Usero Operatora Admino OEMSensor CommandsThe sensor commands allow you to display detailed sensor information.listPurpose:Lists sensors and thresholds in a wide table format.Example:$ ipmitool −I lan −H test−pdupcr20−20 −U admin −a sensor listget 0 []Purpose:Prints information for sensors specified by name.Example:$ ipmitool −I lan −H test−pdupcr20−20 −U admin −P pass sensorget “R.14 Current” |
