USING THE WEB INTERFACEEATON Managed ePDU User’s Guide 164201xxx Rev 1 DRAFT 10−OCT−200864About PoliciesThe diagram below illustrates the way policies associate events with destinations. Inthis example, five events and two policies are defined. Events 1 and 2 are associated with the Red policy. This means they trigger anemail message to an administrator and an SNMP trap. Events 3, 4, and 5 are associated with the Syslog policy. They trigger entries in theevent log, but do not send email messages or traps.PoliciesRedSyslogDestinationsEvent LogeMailSNMPSwitch OutletsEvents12345Figure 59. PoliciesDisplay Existing PoliciesTo display a list of existing policies:1. Select Alerts, and then select Alert Policies. The Alert Policies page displays. Itlists each policy and shows their destinations (see Figure 60).Figure 60. Alert Policies Page2. You can modify or delete a policy by clicking the corresponding button next tothe policy. You can add a new policy and configure alerts and destinations byclicking the appropriate link.