USING THE WEB INTERFACEEATON Managed ePDU User’s Guide 164201xxx Rev 1 DRAFT 10−OCT−200858Setting Outlet ThresholdsTo set the current thresholds of an outlet:1. Select Power Outlets, and then select Outlet Setup. The Outlet Setup page displays(see Figure 53).2. Select an outlet from the Show setup of outlet list.3. Type a number in the Power off period during outlet power cycling field. When anoutlet is power cycled, it is turned off and then back on. The number you enterhere determines the length of time (in seconds) it takes for the outlet to turnback on after is shut down during the power cycle. If left blank, this outlet willuse the value set in the Unit Setup page as a default.NOTE You can power cycle an outlet from the Outlet Details page. See Power Cycling an Outlet" belowfor instructions.4. Set the RMS current thresholds for the outlet in the Thresholds panel.5. Click Apply to save your changes.Viewing Outlet DetailsTo display details about a particular outlet:1. Select Power Outlet and then select Outlet Details. The Outlet Details pagedisplays (see Figure 54).Figure 54. Outlet Details Page
