USING THE WEB INTERFACEEATON Managed ePDU User’s Guide  164201xxx Rev 1 DRAFT 10−OCT−200874Managing the ePDUYou can display basic device information about the ePDU, give the ePDU a newdevice name, and modify any of the network settings that were entered during theinitial configuration process. You can also set the ePDU’s date and time and configureits SMTP settings so it can send email messages when alerts are issued.Displaying Basic Device Information1. To display basic information about an ePDU, select Maintenance and then selectDevice Information. The Device Information page displays (see Figure 72).This page displays the product name, serial number, IP and MAC addresses ofthe ePDU, and detailed information about the firmware running in the ePDU.Figure 72. Device Information Page2. To open or save an XML file providing details for Eaton Technical Support, clickthe View the datafile for support link.

package contents

before you begin

resetting to factory defaults

front panel

power cord

Using the Web Interface

Changing Your Password

Navigation Path

Status Panel

Status Messages

Reset to Defaults

Outlets List

All Outlets Control

Creating a User Profile

Copying a User Profile

Deleting a User Profile

Creating a User Group

Setting System Permissions

Setting the Outlet Permissions

Copying a User Group

Deleting a User Group

Enabling the Firewall

Creating Firewall Rules

Deleting a Firewall Rule

Enabling Group−based Access Control Rules

Creating Group−Based Access Control Rules

Setting Up User Login Controls

Enabling Login Limitations

Enabling Strong Passwords

Setting Up a Digital Certificate

Installing a Certificate

Setting Up LDAP Authentication

Setting Up RADIUS Authentication

Setting Up Outlets and Power Thresholds

Setting Default Outlet State

Setting the ePDU Thresholds

Setting the Outlet Power−Up Sequence

Naming Outlets

Setting Outlet Thresholds

Power Cycling an Outlet

Environmental Sensors

Configuring Environmental Sensors and Thresholds

Viewing Sensor Readings

Creating Alert Policies

About Policies

Create a Policy

Modify a Policy

Specifying the Alert Destination

Setting Up Event Logging

Viewing the Internal Event Log

Configuring NFS Logging

Configuring SMTP Logging

Configuring SNMP Logging

Managing the ePDU

Displaying Model Configuration

Modifying the Network Settings

Modifying the Communications, Port, and Bandwidth Settings

Modifying the LAN Interface Settings

Setting the Date and Time

Configuring the SMTP Settings

Configuring the SNMP Settings

Resetting the ePDU

Updating the Firmware

Outlet Grouping

Grouping Outlets Together

Controlling Outlet Groups

Editing or Deleting Outlet Groups

Using the CLP Interface

Using SSH or Telnet

Showing Outlet Information

Turning an Outlet On or Off

Using the IPMI Tool Set

info [channel number]

getciphers <all | supported> <ipmi | sol> [channel]

LAN Commands

Sensor Commands

thresh <id> <threshold> <setting

Set Power Set Delay Command

Set Group State Command

Get Group Membership Command

Set Socket ACL

Test Sensors

Appendix A: Equipment Setup Worksheet

Appendix B: Event Types

Appendix C: Using SNMP

Configuring Users for Encrypted SNMP v3

Configuring SNMP Traps

SNMP Gets and Sets

Appendix D: Specifications

Eaton Managed ePDU User Manual

Managed ePDU

Managed ePDU 0U

Managed ePDU 1U