USING THE IPMI TOOL SETEATON Managed ePDU User’s Guide 164201xxx Rev 1 DRAFT 10−OCT−2008 103Get Group Membership CommandRequest Data 1 Group number[7–5] reserved[4–0] group number, valid numbers: 0–23Response Data 1 Completion Code2 [7–1] reserved[0] 1b = group is enabled, 0b = group is disabled3 [7] 1b = socket 7 belongs to group…[0] 1b = socket 0 belongs to group4 [7] 1b = socket 15 belongs to group…[0] 1b = socket 8 belongs to group5 [7] 1b = socket 23 belongs to group…[0] 1b = socket 16 belongs to groupSet Group Power On Delay CommandRequest Data 1 Group number[7–5] reserved[4–0] group number, valid numbers: 0–232 Delay in 1/10 secondsThis delay overwrites the global delay for all of the sockets in that group.The delay applies not only when using the Set Group State command, butalso when using the Set Receptacle State command.Response Data 1 Completion CodeGet Group Power On Delay CommandRequest Data 1 Group number[7–5] reserved[4–0] group number, valid numbers: 0–23Response Data 1 Completion Code2 Delay in 1/10 seconds
