USING THE WEB INTERFACEEATON Managed ePDU User’s Guide 164201xxx Rev 1 DRAFT 10−OCT−2008 29Reset to DefaultsMany pages provide a Reset to Defaults button that returns all fields to their defaultvalues. If you use this button, you must click the Apply button afterward. This savesthe defaults. If you neglect to do this, the next time you return to the page, you willstill see the non−default values.Default AsteriskIf a field has an asterisk after it, as shown in Figure 30, the value is set to the default.If you change the default, the asterisk disappears. If you reset to defaults, the asteriskreturns.Figure 30. Default AsteriskRefreshMany pages provide a Refresh button. If a page is displayed for a while, theinformation may become stale." Click this button periodically to reload the page andupdate the information displayed.Using the Home PageThe Home page displays first after a successful login. It consists of a Global Status,an Outlets list, and an All Outlets Control panel. The Home page also contains anenvironmental sensors panel, and a time stamp in the top right corner, noting whenthe data on the screen was last refreshed.You can return to the Home page from any other page in the Web interface byclicking: The Home link in the navigation path The Eaton logo above the Status panel Model name under the logoGlobal Status PanelThe Global Status panel provides an overview of the ePDU’s power consumption andtemperature. See Figure 31. It shows: Unit voltage RMS current (in amps) True power (in watts) CPU temperature (in degrees Celsius)Figure 31. Global Status Panel