USING THE WEB INTERFACEEATON Managed ePDU User’s Guide 164201xxx Rev 1 DRAFT 10−OCT−2008 75Displaying Model ConfigurationTo display information about the specific model of the ePDU that you are using, selectMaintenance and then select Device Information. The device information page displays.Information about your model is shown in the Model Configuration panel below theDevice Information panel. See Figure 72 for details.This panel shows: The ePDU’s and board’s maximum current capabilities The outlet maximum RMS current and the current threshold sum restriction The number of outlets mapped to the boardDisplaying Connected UsersTo display a list of users currently connected to the ePDU, select Maintenance andthen select Device Information. The Device Information page displays. A list ofconnected users is shown in the Connected Users panel. See Figure 72 for details.The panel shows the Username and IP address of each user, and indicates whetheror not the connection is active.Naming the ePDUBy default, the ePDU has a device name of pdu." You may want to give the ePDU amore easily recognizable name to help identify it. To do this:1. Select Device Settings, and then select Network. The Network Settings pagedisplays. The left side of the page consists of the Basic Network Settings panel,which contains the device name. See Figure 73.Figure 73. Basic Network Settings Panel
