USING THE WEB INTERFACEEATON Managed ePDU User’s Guide 164201xxx Rev 1 DRAFT 10−OCT−200886NOTE Grouped outlets are designed to be controlled together. Avoid doing anything to affect these outletsindividually, such as turning one of the outlets ON or OFF, or unplugging one of the participating ePDUs. Oncegrouped, power control to those outlets should be managed from the Outlet Groups list.Controlling Outlet GroupsAny outlet groups created from this ePDU are added to the Outlet Groups list. Fromthis list, you can power ON, power OFF or cycle power to the outlet group (if thecapability is available). To control the power to an outlet group:1. Select Outlet Groups, then Outlet Group Details. The Outlet Groups list displays.Figure 87. Outlet Groups ListNOTE Only outlet groups created through this specific ePDU display in this Outlet Groups list. Outlet groupscreated through another ePDU do not display here, even if they contain outlets from this ePDU.2. To turn an outlet group on, off, or cycle the power to it, click On, Off, or Cycle inthe row for the outlet group.3. You will be prompted to confirm your choice. Click OK to proceed.4. The page refreshes once to indicate that the desired command was performed,and again a few seconds later to update the status of the outlet group.NOTE The page must finish loading or refreshing before selecting an action. If you select an action beforethe page has finished updating the status of all outlet groups, the command will be ignored.5. To view or edit the composition of an outlet group, click on the name of theoutlet group in the list to go to the Outlet Group Editor for the selected outletgroup.
