USING THE WEB INTERFACEEATON Managed ePDU User’s Guide 164201xxx Rev 1 DRAFT 10−OCT−200860Environmental SensorsIn addition to monitoring its own internal temperature, the ePDU can monitor theenvironment where environmental sensors are placed.Connecting the Environmental SensorsTo enable the ePDU to measure environmental factors, connect the cable of theenvironmental sensors to the Feature port of the ePDU.Mapping the Environmental SensorsOnce the sensors have been physically connected to the ePDU, they must bemapped to the unit’s logical sensors before the ePDU recognizes and displays thereadings from them. To do this:1. Select Device Settings, and then select Environmental Sensors. The EnvironmentalSensors page displays (see Figure 55). The page lists the logical Temperature andHumidity sensors first.When physical sensors are attached to the ePDU, they appear listed below thelogical sensors. Temperature sensors are listed in the EnvironmentalTemperature Sensors table, humidity sensors in the Environmental HumiditySensors table. If the sensors are not attached properly, the page will state thatNo sensors were detected.Figure 55. Environmental Sensors Page