USING THE WEB INTERFACEEATON Managed ePDU User’s Guide 164201xxx Rev 1 DRAFT 10−OCT−2008 79Setting the Date and TimeYou can set the internal clock on the ePDU manually, or you can link to a NetworkTime Protocol (NTP) server and let it set the date and time.1. Select Device Settings, and then select Date/Time. The Date/Time Settings pagedisplays (see Figure 76).Figure 76. Date/Time Settings Page2. Enter a time zone by selecting the appropriate Coordinated Universal Time (UTC)offset from the UTC Offset list (for example, US Eastern Standard Time = UTC−5).3. To set the date and time manually, select the User Specified Time option, thenenter the date and time in the appropriate fields. Use the yyyy/mm/dd format forthe date and hh:mm:ss format for the time.4. To let an NTP server set the date and time, select the Synchronize with NTP serveroption and enter the IP addresses of primary and secondary NTP servers in thecorresponding fields.NOTE If the ePDU’s IP address is assigned through DHCP, the NTP server addresses will be automaticallydiscovered, then users will not be able to enter any data in the fields of primary and secondary time server.5. Click Apply. The date and time settings are applied.
