USING THE WEB INTERFACEEATON Managed ePDU User’s Guide 164201xxx Rev 1 DRAFT 10−OCT−2008 73Configuring SNMP LoggingEvent logging can be performed by sending SNMP traps to a third−party SNMPmanager. See Appendix C − Using SNMP" for instructions on enabling SNMP EventLogging on ePDU.Configuring Syslog ForwardingTo configure Syslog Forwarding:1. Select Device Settings, and then select Event Log. The Event Log Settings pagedisplays. The Syslog Forwarding panel controls the forwarding of system logs(see Figure 70).Figure 70. Syslog Logging Panel2. Select the Enable Syslog Forwarding check box.3. Type an IP address in the IP Address field. This is the address to which the Syslogwill be forwarded.4. By default, when Syslog Forwarding is enabled, seven event types display in theEvent Log Assignments panel to the right. All are disabled by default. To enable anyof these event types, select the appropriate check boxes. See Figure 71.Figure 71. Event Log Assignments Panel5. Click Apply. Syslog Forwarding is configured.