Eaton Managed ePDU User Manual

Contents

USING THE WEB INTERFACEEATON Managed ePDU User’s Guide 164201xxx Rev 1 DRAFT 10−OCT−2008 333. Select a user group from the the User Group list. The user group determines thesystem functions and outlets this user can access.If you select None, the user is not assigned to a user group. This means you haveto set the user’s permissions individually. Until you do this, the user is effectivelyblocked from accessing any system functions and outlets. (For instructions onsetting permissions individually, see Setting User Permissions Individually"below.)4. If you would like this user to set his or her own password, select the Enforce userto change password on next login. check box. The user logs in the first time usingthe password you entered above, and then is forced to change it to one of his orher choice.5. Click Create. The user profile is created.NOTE The Use Password as Encryption Phrase, SNMP v3 Encryption Phrase, and Confirm SNMP EncryptionPhrase apply only when using secure SNMP v3 communication. See Appendix C − Using SNMP" for moredetails.Copying a User ProfileYou can create a new user profile with the exact same settings as an existing profileby using the copy function. You can then modify the profile so that it differs asnecessary from the original. This is a quick and easy way to create user profiles.To copy a user profile:1. Select User Management, and then select Users & Groups to display the User/GroupManagement page.2. Select an existing user profile from the Existing Users list.3. Type the name of the new user profile in the New User Name field.4. Click Copy. A new user profile is created with the same settings as the existingprofile. The new profile can be viewed by clicking the Existing Users list.Modifying a User ProfileEvery user with user management permissions can modify a user profile. SeeSetting System Permissions" on page 36 for information about setting systempermissions.To modify a user profile:1. Select User Management, and then select Users & Groups to display the User/GroupManagement page.2. Select the user profile you want to modify from the Existing Users list. All theinformation in the user profile is displayed except the password.3. Make all necessary changes to the information shown. To change the password,type a new password in the Password and Confirm Password fields. If thepassword field is left blank, the password is not changed.4. Click Modify. The user profile is modified.