Eaton NetDirector B064-016-04-IPH Manual

Also see for NetDirector B064-016-02-IPH: Installation instructions

25OSD OperationUser PreferencesThe User Preferences page allows users to set up their ownindividual working environments. The B064-Series KVMSwitch stores a separate record for each user profile, and setsup the working environment according to the Username thatwas used to access the KVM switch. Note: The User Preferencespage is different on the Web Browser version than the AP Clientversion. The AP Client version does not include the password,Viewer or Welcome Screen option.Setting DescriptionLanguage Selects the language that the interface displays in. Options are English (default), Spanish, French,German, Russian, Italian, Japanese, Korean, traditional Chinese and simplified Chinese.OSD Hotkey Selects which hotkey controls the OSD function. You can choose from the following options; [Scroll Lock][Scroll Lock], [Ctrl] [Ctrl], [Alt] [Alt], [Shift] [Shift] and [Print Screen] [Print Screen]. The default is [ScrollLock] [Scroll Lock].ID Display Selects how the Port ID is displayed: the Port Number alone (PORT NUMBER); the Port Name alone(PORT NAME); or the Port Number plus the Port Name (PORT NUMBER + PORT NAME). The default isPORT NUMBER + PORT NAME.ID Duration Determines how long a Port ID displays on the monitor after a port change has taken place. You canchoose an amount from 1—255 seconds. The default is 3 seconds. A setting of 0 (zero) means the PortID is always on.Scan Duration Determines how long the focus dwells on each port as it cycles through the selected ports in Auto ScanMode. Key in a value from 1—255 seconds. The default is 5 seconds; a setting of 0 disables the Scanfunction.Screen Blanker If there is no input from the console for the amount of time set with this function, the screen is blanked.Key in a value from 1—30 minutes. A setting of 0 disables this function. The default is 0 (disabled). Whenthe screen is blanked, simply moving the mouse over the screen will bring it back up.Note: This setting affects the monitor of the local console only.Logout Timeout If there is no user input for the amount of time set with this function, the user is automatically logged out.A login is needed before the B064-Series KVM Switch can be accessed again. The default is 30 minutes.Toolbar The Toolbar option allows you to enable/disable the OSD Toolbar. (See The OSD Toolbar section underRemote Session Operation for details.) As all of the features of the OSD Toolbar are available in theControl Panel, you may want to disable it. The default setting is enabled.Viewer In the browser version of this page, a viewer section is available. You can choose which viewer method ispreferred when connecting to a port by clicking the up or down arrow to shift around the viewer methodposition. Usable viewers are automatically determined by the status of the system at the time of the loginand by browser type. When you try to connect to a port (double-click the port or select a port and clickConnect), the system will use the viewer according to the viewer list.· The top-most method is the most preferred method (web client by default).· If the preferred method is supported when connecting to a port, the system will try connecting usingthe preferred method.· If the method is not supported, the system will try connecting using the next method. Try this methodlast.For B064-008-01-IPG and B064-016-01-IPG models, both user preference and password settingsare located at upper right-hand corner of User Icon Please see details at IPG’s User settingssection in OSD Operation chapterThe page settings are explained in the following table: