Eaton NetDirector B064-016-04-IPH Manual

Also see for NetDirector B064-016-02-IPH: Installation instructions

73The OSD ToolbarThe OSD provides a toolbar to help you control the B064-Series KVM Switch from within the captured port. There arethree hotkey combinations that can be used to pull up theOSD Toolbar and/or OSD when in a remote session:• When in a remote session, hit the hotkey [Scroll Lock]twice to open the OSD Toolbar.• When in a remote session, hit the hotkey [Scroll Lock]three times to open the OSD.• When the OSD Toolbar is opened in a remote session, hitthe hotkey [Scroll Lock] once to open the OSD.The OSD Toolbar is shown below:Depending on the settings that were selected for ID Display,the Port Number and/or the Port Name display at the right ofthe toolbar.Note: When the toolbar displays, mouse input is confined to thetoolbar area and keyboard input (other than the Scroll Lock/Control hotkey) has no effect.Icon DescriptionClick to skip to the first accessible port on the entire installation without having to invoke the OSD.Click to skip to the first accessible port previous to the current one without having to invoke the OSD.Click to begin Auto Scan Mode. The B064-Series KVM Switch automatically switches among the ports thatwere selected for Auto Scanning in the Port Select and Filter functions. This allows you to monitor theiractivity without having to switch among them manually.Click to skip from the current port to the next accessible one without having to invoke the OSD.Click to skip from the current port to the last accessible port on the installation without having to invokethe OSD.Click to bring up the OSD.Click to close the OSD toolbar.Click to invoke Panel Array Mode. (See Panel Array Mode section under The OSD Toolbar for details.)As the length of Cat5 cable between the KVM and connected computer can affect video quality, thissetting is designed to compensate for shorter or longer lengths. Click to toggle through the Cat5 cablelength options; Short (Less than 32 ft. / 10 m), Medium (Between 32 ft. / 10 m and 82 ft. / 25 m) and Long(Over 82 ft. / 25 m).Note: This feature only applies to B064-016-01-IPG and B064-008-01-IPG models.Toolbar HotkeysWhen the Toolbar is displayed, hotkeys can be used to switch between ports. The table below describes what actions can beperformed.Hotkey ActionSkips from the current port to the first accessible port previous to it. To gain control of the selected port, hit the [Esc]key or click on the X icon in the ToolbarSkips from the current port to the first accessible port after it. To gain control of the selected port, hit the [Esc] key orclick on the X icon in the ToolbarSkips from the current port to the first accessible port on the installation. To gain control of the selected port, hit the[Esc] key or click on the X icon in the ToolbarSkips from the current port to the last accessible port on the installation. To gain control of the selected port, hit the[Esc] key or click on the X icon in the ToolbarA Starts an Auto Scan. To exit Auto Scan and take control of the currently selected port, hit the [Esc] or [Spacebar] key, orclick on the X icon in the Toolbar.P Pauses an Auto Scan. To resume scanning, hit any key other than the [Esc] or [Spacebar]Remote SessionThe meanings of the toolbar icons are given in the table below: