Eaton NetDirector B064-016-04-IPH Manual

Also see for NetDirector B064-016-02-IPH: Installation instructions

32OSD OperationUser ManagementAt this point you can do any of the following:• Assign the new user to a group by selecting the Groups tabin the user’s notebook. (See Assigning Users to a Group fromthe User’s Notebook section under User Management fordetails.)• Assign port access rights for a user by selecting the Devicestab. (See Device Assignment section under User Managementin OSD Operation for details.)• Add more users and/or create groups and finish configuringthe user account later.Modifying User AccountsTo modify a user account, do the following:1. Select the desired user’s name from the User List or the Main Panel and click Modify.2. The same as when creating an account, make any necessary changes to the user account and click Save.Deleting User AccountsTo delete a user account, do the following:1. Select the desired user’s name from the Main Panel and click Delete.2. A confirmation dialog box will appear asking if you are sure you want to delete the selected user account. Click OK.GroupsGroups give Administrators and Super Administrators a convenient way to efficiently manage users and devices. Since deviceaccess rights apply to anyone who is a member of the group, administrators need only set them once for the group, instead ofhaving to set them for each user individually. Multiple groups can be defined to allow some users access to specific devices, whilerestricting other users from accessing them.Groups – Creating GroupsTo create a group, do the following:1. Highlight Groups in the Groups List on the left side of thescreen.Note: When accessing the OSD via web browser, you will need to clickthe Groups sub-section tab first.2. Click Add at the bottom of the main panel. The Groupnotebook opens, with the Group tab selected: