Eaton NetDirector B064-016-04-IPH Manual

Also see for NetDirector B064-016-02-IPH: Installation instructions

54OSD OperationThe Date/Time page allows the user to set the date andtime parameters for the KVM switch. The following sectiondescribes the settings on this page.Time Zone• Select the Time Zone and City that most closely resembleswhere the KVM switch is in using the drop-down menu atthe top of this section.• If your area uses Daylight Savings Time, check the DaylightSavings Time checkbox.To manually set the date and time, do the following:1. In the Date section, select the current month using thedrop-down menu.2. If needed, click the < or > buttons in the Date section tomove backward or forward to the correct year.3. In the calendar in the Date section, click on the current day.4. In the Time section, enter in the current time using the 24hour HH:MM:SS format.5. Click the Set button in the Time section to apply yourchanges.Network TimeTo have the time automatically synchronized to a networktime server, do the following:1. Check the Enable Auto Adjustment checkbox.2. Select a time server from the Preferred Time Server drop-down list; or, check the Preferred Custom Server IP checkboxand enter in the IP of your preferred time server.3. If desired, repeat step two to enter an Alternate Time Server.4. Key in the desired number of days between synchronizationin the Adjust Time Every __ Days field.5. Click the Adjust Time Now button to synchronizeimmediately.Date/TimeBlade Server ConfigurationFor Super Administrators and Administrators/Users whohave been given permission, when you access the DeviceManagement section with a Blade Server selected in theSidebar tree, its Configuration page appears.Adding a Blade ServerTo configure a new blade server, do the following.1. Select its icon in the Sidebar tree, then click Add in the mainpanel. The Setup Blade Server dialog box appears, with theStep 1 tab displayed.