Eaton NetDirector B064-016-04-IPH Manual

Also see for NetDirector B064-016-02-IPH: Installation instructions

6IntroductionComponentsRear ViewNo Component Description1 Power Sockets (C14) The two C14 power sockets are located here. Connect the included power cords (C13 to C14) fromhere to an appropriate power source.Note: To help protect your system from sudden, transient increases and decreases in electrical power, it isrecommended that you plug your devices into a Tripp Lite surge protector, line conditioner or uninterruptible powersupply (UPS).2 Power Switches The On/Off switches for the two power supplies are here3 Secondary LAN Port(LAN 2)The cable that connects the KVM switch to the backup network plugs in here.4 Primary LAN Port(LAN 1)The cable that connects the KVM switch to the primary network plugs in here.5 Grounding Terminal Connect the included grounding wire to this terminal to ground the KVM switch.6 Modem Port (Serial) An optional dial-in connection is available for use in the event the KVM switch is not available overthe Primary or Secondary networks7 Local Console Ports This area features VGA and HDMI ports for the connection of either a VGA or HDMI monitor, as wellas two USB ports for the connection of a keyboard and mouse.Note: The B064-008-01-IPG and B064-016-01-IPG will not feature a HDMI port but instead two PS/2 ports forconnection of mouse and keyboard.8 Server Ports Cat5e/6 cable connects between these ports and the SIUs to connect computer/servers to the KVMswitch.Note: The figure above shows the rear panel of a B064-032-04-IPG or B064-032-02-IPG. The B064-016-04-IPG and B064-016-02-IPG differ in that itonly has a single block of 16 KVM ports.5511 4466 77 8822 33