Eaton NetDirector B064-016-04-IPH Manual

Also see for NetDirector B064-016-02-IPH: Installation instructions

48OSD OperationSetting DescriptionEnable Fixed NumberDial BackWhen the Enable Fixed Number Dial Back checkbox is checked, the KVM will hang up on the modem whenthere is an incoming call, and dial back to the modem represented by the phone number mentioned inthe Phone Number field.Enable Flexible DialBackWhen the Enable Flexible Dial Back checkbox is checked, the KVM can dial back to any modem specifiedby the user connecting to the KVM. Simply enter a password into the Password field, and when a userconnects to the KVM, they will be prompted to enter a username and password. They should enter thephone number of the modem that they want to dial back to as the username, and use the password thatis set in the Password field as the password.In case the B064-Series KVM switch cannot be accessed viathe LAN, it can be accessed via the switch’s modem port. Toenable support for PPP (modem) operation, check the EnableOut of Band Access checkbox. When checked, Enable Dial Backand Enable Dial Out functions become available.Setting DescriptionISP Settings Enter in the Phone Number, Account Name and Password that you use to connect to your ISP here.Dial Out Schedule This section allows you to determine what times your KVM switch will dial out over your ISP connection.• Every – Check this option to choose between the 5 options in the drop-down menu; Never, every Hour,every 2 Hours, every 3 Hours or every 4 Hours.• Daily at – Check this option to enter in a time that the KVM will dial out over your ISP every day. Use thehh:mm format to specify the desired time.• PPP Online Time – Enter in the amount of time you want a ISP connection to last before it is terminated.A setting of 0 means that the ISP connection will not automatically disconnect itself.Emergency Dial Out In the event that the KVM gets disconnected from the network, or the network goes down, this featurewill automatically connect via the ISP dial up connection.• PPP Stays Online Until Network Recovery – When this option is checked, the ISP connection will remainactive until the network connection is reestablished.• PPP Online Time – When this option is checked, the ISP connection will remain active for the amount oftime you set here. A setting of 0 means that the ISP connection will not automatically disconnect itself.Dial Out MailConfigurationThis section allows you to set up email notifications of systems events via SMTP server. Thesenotifications will be sent over the ISP network connection, in contrast to the notifications set up in ANMSEvent Destination (see SMTP Settings), which go out over the standard network.• SMTP Server IP Address – Enter the IPv4 address, IPv6 address or domain name of you SMTP serverhere.• SMTP Server Requires Secure Connection (SSL) – Check this checkbox if your server requires a secure SSLconnection.• SMTP Server Requires Authentication – Check this checkbox if your server requires authentication.When checked, the Account Name and Password fields are activated. Enter in the Account Name andPassword for your SMTP server.• In the From field, key in the email address that you want the report to show up as being sent from.Note: Only one email address is allowed in the From field, and it cannot exceed 64 Bytes. 1 Byte is equal to 1 Englishalphanumeric character.• In the To field, key in the email address(es) you want the report to be sent to.Note: If you are entering more than one address, separate them with a semicolon. The size of all email addressescannot combine to more than 256 Bytes. 1 Byte is equal to 1 English alphanumeric character.When you are done making all of your changes, click the Save button.Enable Dial OutTo use the dial out feature, you must establish an account with an Internet Service Provider (ISP), and use a modem to dial out toyour ISP account. Check the Enable Dial Out checkbox to enable this feature. The settings found in this section are described inthe table below.OOBCEnable Dial BackIf the Enable Dial Back checkbox is checked, the switch will disconnect calls that dial into it, and dial back to one of the entries specified inthe table below.