Eaton NetDirector B064-016-04-IPH Manual

Also see for NetDirector B064-016-02-IPH: Installation instructions

60OSD OperationSystem OperationThe System Operation sub-section allows you to clear portnames, and reset the KVM configuration settings to theirdefault values.The functions available in the System Operation page are explained in the table below.Field ExampleClear Port Names Click this button to clear all of the port names on the installation and restore them to their default values.Upon clicking this button, you will be prompted to confirm that you wish to clear all port names. Click Yes toproceed.Reset DefaultValuesClick this button to undo all configuration changes that have been made to the KVM, and restore them tothe factory default settings. This does not affect port names, account information or network information.Upon clicking this button, you will be prompted to confirm that you wish to proceed. Click Yes to proceed.Reset on Exit Check this box and click the Apply button to have the KVM switch reset itself and implement all new settingsupon logging out. (Following the reset, allow approximately 30 to 60 seconds before logging back into theKVM.)If you change the IP address of the KVM, the Reset on Exit checkbox is automatically checked. To preventthe KVM from resetting and saving the new IP address, uncheck this box.Note: Un-selecting this checkbox will only cause the new network settings to be ignored for one logout. When you log backin, the changes you made still appear in the Network settings fields, and the Reset on Exit checkbox is once again checked.To ensure that these settings don’t get changed to something you don’t want, always make sure that you leave the Networksettings page with the correct information entered in.The Download icon is used to download non-browser APversions of the Windows and Java Clients, as well as the LogServer. Selecting this tab will open a drop-down list of theprograms that are available for download.Note: If you have not been given access to one of these applications, youwill not be able to download it.Click on the Download icon and select the program you wantto download. Save it to a convenient location on your harddisk and run it from there.MaintenanceDownload