Eaton Power Xpert 9395C Installation And Operation Manual

Eaton Power Xpert 9395C UPS Installation and Operation Manual 164000821—Rev 06 10977..33..22 UUssiinngg tthhee TToouucchh SSccrreeeennThe touch screen control panel provides an operator interface with the UPS system. Figure 68 identifies thedisplay areas discussed in the following sections.Touching an area on the screen that requires a password brings up the Sign In Request pop-up. Touch the X inthe upper right corner of the pop-up, then touch the padlock symbol in the upper right corner to obtain thepassword request pop-up (see Figure 69).Figure 68. Parts of the Touch ScreenAB ~~~~A The UPS status area automatically displays the Eaton model number, current time and date, active alarms, active notices,and load percent and battery run time for the UPS. If the Eaton Environmental Monitoring Probe is installed, thetemperature and humidity sensed by the probe will also be displayed. The small head symbol between the system modeland time allows the operator select a different language from an imbedded list.The top line of the display blinks while scrolling when the system needs attention. Some notices and alarms may beaccompanied by an audible horn. To silence the horn, touch anywhere on the control panel once. For more informationabout alarms and notices, see paragraph 7.3.7 System Events Main Screen.B The information area contains data about UPS status and operations.C After touching the padlock in the upper right corner, the numerical keypad appears to allow entry of the system accesspass code for operation. See Table 26 Security Levels and Functions.UPS Operating Instructions