1-12To do… Use the command… RemarksConfigure the type of service tos valueOptionalBy default, the service type iszero.Start the test test-enable RequiredDisplay test results display hwping results[ admin-name operation-tag ]RequiredYou can execute the commandin any view.7) Configuring TCP test on HWPing clientFollow these steps to configure TCP test on HWPing client:To do… Use the command… RemarksEnter system view system-view —Enable the HWPing clientfunction hwping-agent enableRequiredBy default, the HWPing clientfunction is disabled.Create a HWPing test groupand enter its viewhwping administrator-nameoperation- tagRequiredBy default, no test group isconfigured.Configure the test type test-type { tcpprivate |tcppublic }RequiredBy default, the test type isICMP.Configure the destinationaddress destination-ip ip-addressRequiredThis IP address and the oneconfigured on the HWPingserver for listening servicesmust be the same.By default, no destinationaddress is configured.Configure the destination port destination-portport-numberRequired in a Tcpprivate testA Tcppublic test is a TCPconnection test on port 7. Usethe hwping-servertcpconnect ip-address 7command on the server toconfigure the listening serviceport; otherwise the test will fail.No port number needs to beconfigured on the client; anydestination port numberconfigured on the client will nottake effect.By default, no destination portnumber is configured.Configure the source IPaddress source-ip ip-addressOptionalBy default, the source IPaddress is not specified.
