2-6To do… Use the command… RemarksEnter system view system-view —Enter AUX user interface view user-interface aux 0 —Configure not to authenticateusersauthentication-modenoneRequiredBy default, users logging in throughthe console port (AUX user interface)are not authenticated.Set the baudrate speed speed-valueOptionalThe default baud rate of a consoleport is 9,600 bps.Set the checkmodeparity { even | none |odd }OptionalBy default, the check mode of aconsole port is none, that is, nocheck is performed.Set the stop bits stopbits { 1 | 1.5 | 2 } OptionalThe stop bits of a console port is 1.Configurethe consoleportSet the data bits databits { 7 | 8 }OptionalThe default data bits of a consoleport is 8.Configure the command levelavailable to users logging in tothe user interfaceuser privilege level levelOptionalBy default, commands of level 3 areavailable to users logging in to theAUX user interface, and commandsof level 0 are available to userslogging in to the VTY user interface.Enable terminal services shellOptionalBy default, terminal services areavailable in all user interfaces.Set the maximum number oflines the screen can containscreen-lengthscreen-lengthOptionalBy default, the screen can contain upto 24 lines.You can use the screen-length 0command to disable the function todisplay information in pages.Set the history commandbuffer sizehistory-commandmax-size valueOptionalThe default history command buffersize is 10. That is, a historycommand buffer can store up to 10commands by default.Set the timeout time for theuser interfaceidle-timeout minutes[ seconds ]OptionalThe default timeout time of a userinterface is 10 minutes.With the timeout time being 10minutes, the connection to a userinterface is terminated if no operationis performed in the user interfacewithin 10 minutes.You can use the idle-timeout 0command to disable the timeoutfunction.
