1-12GigabitEthernet1/0/2 inboundreflector port: GigabitEthernet1/0/4remote-probe vlan: 102) Configure the intermediate switch (Switch B)# Configure VLAN 10 as the remote-probe VLAN. system-view[Sysname] vlan 10[Sysname-vlan10] remote-probe vlan enable[Sysname-vlan10] quit# Configure GigabitEthernet 1/0/1 as the trunk port, allowing packets of VLAN 10 to pass.[Sysname] interface GigabitEthernet 1/0/1[Sysname-GigabitEthernet1/0/1] port link-type trunk[Sysname-GigabitEthernet1/0/1] port trunk permit vlan 10[Sysname-GigabitEthernet1/0/1] quit# Configure GigabitEthernet 1/0/2 as the trunk port, allowing packets of VLAN 10 to pass.[Sysname] interface GigabitEthernet 1/0/2[Sysname-GigabitEthernet1/0/2] port link-type trunk[Sysname-GigabitEthernet1/0/2] port trunk permit vlan 103) Configure the destination switch (Switch C)# Create remote destination mirroring group 1. system-view[Sysname] mirroring-group 1 remote-destination# Configure VLAN 10 as the remote-probe VLAN.[Sysname] vlan 10[Sysname-vlan10] remote-probe vlan enable[Sysname-vlan10] quit# Configure the destination port and remote-probe VLAN for the remote destinationmirroring group.[Sysname] mirroring-group 1 monitor-port GigabitEthernet 1/0/2[Sysname] mirroring-group 1 remote-probe vlan 10# Configure GigabitEthernet 1/0/1 as the trunk port, allowing packets of VLAN 10 to pass.[Sysname] interface GigabitEthernet 1/0/1[Sysname-GigabitEthernet1/0/1] port link-type trunk[Sysname-GigabitEthernet1/0/1] port trunk permit vlan 10[Sysname-GigabitEthernet1/0/1] quit# Display configuration information about remote destination mirroring group 1.[Sysname] display mirroring-group 1mirroring-group 1:type: remote-destinationstatus: active
