1-28Configuration procedurez Configure HWPing Server (Switch B):# Enable the HWPing server and configure the IP address and port to listen on. system-view[Sysname] hwping-server enable[Sysname] hwping-server tcpconnect 10.2.2.2 8000z Configure HWPing Client (Switch A):# Enable the HWPing client. system-view[Sysname] hwping-agent enable# Create a HWPing test group, setting the administrator name to administrator and test tag totcpprivate.[Sysname] Hwping administrator tcpprivate# Configure the test type as tcpprivate.[Sysname-hwping-administrator-tcpprivate] test-type tcpprivate# Configure the IP address of the HWPing server as 10.2.2.2.[Sysname-hwping-administrator-tcpprivate] destination-ip 10.2.2.2# Configure the destination port on the HWPing server.[Sysname-hwping-administrator-tcpprivate] destination-port 8000# Configure to make 10 probes per test.[Sysname-hwping-administrator-tcpprivate] count 10# Set the probe timeout time to 5 seconds.[Sysname-hwping-administrator-tcpprivate] timeout 5# Start the test.[Sysname-hwping-administrator-tcpprivate] test-enable# Display test results.[Sysname-hwping-administrator-tcpprivate] display hwping results administrator tcpprivateHWPing entry(admin administrator, tag tcpprivate) test result:Destination ip address:10.2.2.2Send operation times: 10 Receive response times: 10Min/Max/Average Round Trip Time: 4/7/5Square-Sum of Round Trip Time: 282Last complete test time: 2000-4-2 8:26:2.9Extend result:SD Maximal delay: 0 DS Maximal delay: 0Packet lost in test: 0%Disconnect operation number: 0 Operation timeout number: 0System busy operation number: 0 Connection fail number: 0Operation sequence errors: 0 Drop operation number: 0Other operation errors: 0[Sysname-hwping-administrator-tcpprivate] display hwping history administrator tcpprivateHWPing entry(admin administrator, tag tcpprivate) history record:
