2-12 Basic System Configuration and DebuggingWhen configuring basic system configuration and debugging, go to these sections for information youare interested in:z Basic System Configurationz Displaying the System Statusz Debugging the SystemBasic System ConfigurationPerform the following basic system configuration:To do… Use the command… RemarksSet the current date and time ofthe systemclock datetime HH:MM:SS{ YYYY/MM/DD |MM/DD/YYYY }RequiredExecute this command in userview.The default value is 23:55:0004/01/2000 when the systemstarts up.Set the local time zone clock timezone zone-name{ add | minus } HH:MM:SSOptionalExecute this command in userview.By default, it is the UTC time zone.Set the name and time range ofthe summer timeclock summer-timezone_name { one-off |repeating } start-timestart-date end-timeend-date offset-timeOptionalExecute this command in userview.z When the system reaches thespecified start time, itautomatically adds thespecified offset to the currenttime, so as to toggle the systemtime to the summer time.z When the system reaches thespecified end time, itautomatically subtracts thespecified offset from the currenttime, so as to toggle thesummer time to normal systemtime.Enter system view from userview system-view —Set the system name of theswitch sysname sysname OptionalBy default, the name is H3C.Return from current view tolower level view quitOptionalIf the current view is user view, youwill quit the current user interface.
