2-5Configuration ExampleQoS Profile Configuration ExampleNetwork requirementsAll departments of a company are interconnected through a switch. The 802.1x protocol isused to authenticate users and control their access to network resources. A user name issomeone, and the authentication password is hello. It is connected to GigabitEthernet1/0/1 of the switch and belongs to the test.net domain.It is required to configure a QoS profile to limit the rate of all the outbound IP packets of theuser to 128 kbps and configuring to drop the packets exceeding the target packet rate.Network diagramFigure 2-1 Network diagram for QoS profile configurationUserSwitchNetworkAAA ServerGE1/0/1Configuration procedure1) Configuration on the AAA server# Configure the user authentication information and the matching relationship between theuser name and the QoS profile. Refer to the user manual of the AAA server for detailedconfiguration.2) Configuration on the switch# Configure IP addresses for the RADIUS server. system-view[Sysname] radius scheme radius1[Sysname-radius-radius1] primary authentication 10.11.1.1[Sysname-radius-radius1] primary accounting 10.11.1.2[Sysname-radius-radius1] secondary authentication 10.11.1.2[Sysname-radius-radius1] secondary accounting 10.11.1.1
