2-3To do... Use the command... RemarksDisplay the brief information of arouting table display ip routing-tableDisplay the detailed information ofa routing table display ip routing-table verboseDisplay the information of staticroutesdisplay ip routing-table protocol static[ inactive | verbose ]Delete all static routes delete static-routes all Available insystem viewStatic Route Configuration ExampleNetwork requirementsA small company requires that any two nodes in its office network communicate with each other, andthat the network structure be simple and stable. The company hopes that the existing devices that donot support any dynamic routing protocol can be fully utilized.In this case, static routes can implement communication between any two nodes.Network diagramAccording to the network requirements, the network topology is designed as shown in Figure 2-1.Figure 2-1 Network diagram for static route configuration1.1.5.2/24Switch BSwitch ASwitch CHost CHost AHost B1.1.5.1/241.1.1.1/241.1.1.2/241.1.2.2/241.1.2.1/24 1.1.3.2/241.1.3.1/241.1.4.1/241.1.4.2/24Configuration procedureWhen only one interface of the device is interconnected with another network segment, you canimplement network communication by configuring either a static route or default route.
