1-17Configuration procedurez Configure HWPing Client (Switch A):# Enable HWPing client. system-view[Sysname] hwping-agent enable# Create a HWPing test group, setting the administrator name to administrator and test tag to ICMP.[Sysname] hwping administrator icmp# Configure the test type as icmp.[Sysname-hwping-administrator-icmp] test-type icmp# Configure the destination IP address as 10.2.2.2.[Sysname-hwping-administrator-icmp] destination-ip 10.2.2.2# Configure to make 10 probes per test.[Sysname-hwping-administrator-icmp] count 10# Set the probe timeout time to 5 seconds.[Sysname-hwping-administrator-icmp] timeout 5# Start the test.[Sysname-hwping-administrator-icmp] test-enable# Set the maximum number of history records that can be saved to 5.[Sysname-hwping-administrator-icmp] history-records 5# Display test results.[Sysname-hwping-administrator-icmp] display hwping results administrator icmpHWPing entry(admin administrator, tag icmp) test result:Destination ip address:10.2.2.2Send operation times: 10 Receive response times: 10Min/Max/Average Round Trip Time: 3/6/3Square-Sum of Round Trip Time: 145Last succeeded test time: 2000-4-2 20:55:12.3Extend result:SD Maximal delay: 0 DS Maximal delay: 0Packet lost in test: 0%Disconnect operation number: 0 Operation timeout number: 0System busy operation number: 0 Connection fail number: 0Operation sequence errors: 0 Drop operation number: 0Other operation errors: 0[Sysname-hwping-administrator-icmp] display hwping history administrator icmpHWPing entry(admin administrator, tag icmp) history record:Index Response Status LastRC Time1 3 1 0 2000-04-02 20:55:12.32 4 1 0 2000-04-02 20:55:12.33 4 1 0 2000-04-02 20:55:12.24 3 1 0 2000-04-02 20:55:12.25 3 1 0 2000-04-02 20:55:12.2
