1-30[Sysname-hwping-administrator-udpprivate] destination-ip 10.2.2.2# Configure the destination port on the HWPing server.[Sysname-hwping-administrator-udpprivate] destination-port 8000# Configure to make 10 probes per test.[Sysname-hwping-administrator-udpprivate] count 10# Set the probe timeout time to 5 seconds.[Sysname-hwping-administrator-udpprivate] timeout 5# Start the test.[Sysname-hwping-administrator-udpprivate] test-enable# Display test results.[Sysname-hwping-administrator-udpprivate] display hwping results administrator udpprivateHWPing entry(admin administrator, tag udpprivate) test result:Destination ip address:10.2.2.2Send operation times: 10 Receive response times: 10Min/Max/Average Round Trip Time: 10/12/10Square-Sum of Round Trip Time: 1170Last complete test time: 2000-4-2 8:29:45.5Extend result:SD Maximal delay: 0 DS Maximal delay: 0Packet lost in test: 0%Disconnect operation number: 0 Operation timeout number: 0System busy operation number: 0 Connection fail number: 0Operation sequence errors: 0 Drop operation number: 0Other operation errors: 0[Sysname-hwping-administrator-udpprivate] display hwping history administrator udpprivateHWPing entry(admin administrator, tag udpprivate) history record:Index Response Status LastRC Time1 11 1 0 2000-04-02 08:29:45.52 12 1 0 2000-04-02 08:29:45.43 11 1 0 2000-04-02 08:29:45.44 11 1 0 2000-04-02 08:29:45.45 11 1 0 2000-04-02 08:29:45.46 11 1 0 2000-04-02 08:29:45.47 10 1 0 2000-04-02 08:29:45.38 10 1 0 2000-04-02 08:29:45.39 10 1 0 2000-04-02 08:29:45.310 11 1 0 2000-04-02 08:29:45.3For detailed output description, see the corresponding command manual.DNS TestNetwork requirementsAn H3C S5600 series Ethernet switch serves as the HWPing client, and a PC serves as the DNS server.Perform a HWPing DNS test between the switch and the DNS server to test the time required from theclient sends a DNS request to it receives a resolution result from the DNS server.