3-2Software FeaturesS5600 Series Ethernet Switches have abundant software features and can meet the requirements ofdifferent applications. Table 3-2 summarizes the features provided by each module.Table 3-2 Service features of the S5600 seriesPart Features1 CLIz CLIz Hierarchically grouped commandsz CLI online help2 Loginz Logging into a switch through the Console portz Logging into a switch through an Ethernet port byusing Telnet or SSHz Logging into a switch through the Console port byusing modemz Logging into a switch through Web or NMSz Controlling user login using ACL3 Configuration File Management z Saving, restoring, and deleting the configuration file4 VLANz IEEE 802.1Q-compliant VLANz Port-based VLANz Protocol-based VLAN5 IP Address and PerformanceConfigurationz Configuring an IP address for a switchz Configuring the TCP attributes for a switchz Enabling/disabling the switch to receive directedbroadcastsz Enabling/disabling the switch to send ICMP errormessages6 Voice VLAN z Voice VLAN7 GVRP z GARP VLAN Registration Protocol (GVRP)8 Port Basic Configurationz Configuring port auto-negotiation ratez Limiting traffic on a portz Setting broadcast storm suppression globallyz Loopback detection supportedz Cable test9 Link Aggregation z Link Aggregation Control Protocol (LACP)10 Port Isolation z Port isolation group11 Port Security-Port Binding z Multiple security modesz MAC address-to-IP address-to-port binding12 DLDP z Device Link Detection Protocol (DLDP)13 MAC Address Tablez Manually configuring dynamic, static, and blackhole MAC addressesz Configuring the aging time for MAC addressesz MAC address learning limit14 Auto Detectz Auto detectz Auto detect applications in static routing, VRRP,and VLAN interface backup
