1-7ModuleThe module field represents the name of the module that generates system information. You can enterthe info-center source ? command in system view to view the module list. Refer to Table 1-3 formodule name and description.Between “module” and “level” is a “/”.Level (Severity)System information can be divided into eight levels based on its severity, from 1 to 8. Refer to Table 1-1for definition and description of these severity levels. Note that there is a forward slash “/” between thelevel (severity) and digest fields.DigestThe digest field is a string of up to 32 characters, outlining the system information.Note that there is a colon between the digest and content fields.For system information destined to the log host,z If the character string ends with (l), it indicates the log informationz If the character string ends with (t), it indicates the trap informationz If the character string ends with (d), it indicates the debugging informationSourceThis field indicates the source of the information, such as the source IP address of the log sender. Thisfield is optional and is displayed only when the output destination is the log host.ContextThis field provides the content of the system information.Information Center ConfigurationInformation Center Configuration Task ListComplete the following tasks to configure information center:Task RemarksConfiguring Synchronous Information Output OptionalConfiguring to Display the Time Stamp with the UTC Time Zone OptionalSetting to Output System Information to the Console OptionalSetting to Output System Information to a Monitor Terminal OptionalSetting to Output System Information to a Log Host OptionalSetting to Output System Information to the Trap Buffer OptionalSetting to Output System Information to the Log Buffer OptionalSetting to Output System Information to the SNMP NMS Optional
