H3C S9500 Series Operation Manual

Also see for S9500 Series: Operation manual Operation manual Operation manual Operation manual Operating manual

Contents

Operation Manual – Getting StartedH3C S9500 Series Routing Switches Chapter 2 Logging in to Switch2-1Chapter 2 Logging in to Switch2.1 Setting Up Configuration Environment through theConsole PortStep 1: As shown in the figure below, to set up the local configuration environment,connect the serial port of a PC (or a terminal) to the Console port of the switch with theConsole cable.Console portRS-232 Serial portConsole cableFigure 2-1 Set up the local configuration environment through the Console portStep 2: Run a terminal emulator (such as Terminal of Windows 3X or HyperTerminal ofWindows 9X) on the computer. Set the terminal communication parameters as follows:Set “Bits per second” to “9600”, “Data bits” to “8”, “Parity” to “none”, “Stop bits” to “1”,and “Flow control” to “none”, and select the “VT100” as the terminal type..Figure 2-2 Set up new connection