Operation Manual – Routing ProtocolH3C S9500 Series Routing Switches Chapter 6 BGP Configuration6-27By default, the BGP does not implement load balancing.6.2.18 Clearing BGP ConnectionAfter the user changes BGP policy or protocol configuration, they must cut off thecurrent connection so as to enable the new configuration.Perform the following configuration in user view.Table 6-44 Clear BGP connectionOperation CommandClear the connection between BGPand the specified peers reset bgp peer-addressClear all connections of BGP reset bgp allClear the connections between theBGP and all the members of a group reset bgp group group-name6.2.19 Refreshing BGP RoutesIt is required to re-compute associated route information when BGP routing policychanges.Perform the following configuration in user view.Table 6-45 Refresh BGP routesOperation CommandRefresh general BGProutesrefresh bgp { all | peer-address | group group-name }{ import | export } | multicast | vpn-instance | vpnv4 }6.3 Displaying and Debugging BGPAfter the above configuration, execute the display command in any view to display therunning of the BGP configuration, and to verify the effect of the configuration. Executethe reset command in user view to clear the statistics of the configuration. Execute thedebugging command in user view to debug the configuration. Execute the resetcommand in user view to reset the statistic information of BGP.
