Operation Manual – Getting StartedH3C S9500 Series Routing Switches Chapter 3 Command Line Interface3-4Command view Function Prompt Command toenter Command to exit[H3C-Ethernet2/1/1]100M Ethernetport viewKey in interfaceethernet 2/1/1 insystem view[H3C-GigabitEthernet2/1/1]GigabitEthernetport viewKey in interfacegigabitethernet2/1/1 in systemviewEthernet portview:ConfigureEthernet portparameters[H3C-GigabitEthernet2/1/1]10G Ethernetport viewKey in interfacegigabitethernet2/1/1 in systemviewPOS port view:Configure POSport parameters[H3C-Pos2/1/1]Key in interfacepos 2/1/1 insystem viewRPR logical portview: ConfigureRPR portparameters[H3C-rpr2/1/1]Key in interfacerpr2/1/1 insystem viewPort viewRPR POSphysical portview: Configurephysicalparameters forRPR ports[H3C-rpr2/1/1.1]Key in interfacerpr2/1/1.1 insystem viewUse quit to returnto system viewUse return toreturn to user viewVLANviewConfigure VLANparameters[H3C-Vlan1]Key in vlan 1 insystem viewUse quit to returnto system viewUse return toreturn to user viewVLANinterfaceviewConfigure IPinterfaceparameters for aVLAN or a VLANaggregation[H3C-Vlan-interface1]Key in interfacevlan-interface 1in system viewUse quit to returnto system viewUse return toreturn to user viewLocal-user viewConfigure localuser parameters[H3C-luser-user1]Key inlocal-useruser1 in systemviewUse quit to returnto system viewUse return toreturn to user view
