Operation Manual – MPLSH3C S9500 Series Routing Switches Chapter 3 BGP/MPLS VPN Configuration3-70[PE2-ospf-100] area 0.0.0.0[PE2-ospf-100-area-0.0.0.0] network 20.1.1.0 0.0.0.255# Configuring Sham-link[PE2-ospf-100-area-0.0.0.0] sham-link 2.2.2.2 1.1.1.1# Configure static route to PE1 and PE3.[PE2] ip route-static 50.1.1.1 255.255.255.255 168.1.12.1[PE2] ip route-static 50.1.1.3 255.255.255.255 168.1.23.3# Configure the routes distributed to PE1 and PE3.[PE1] ospf 1000[PE1-ospf-1000]area 0[H3C-ospf-1000-area-0.0.0.0] network 168.12.1.0 0.0.0.255[H3C-ospf-1000-area-0.0.0.0] network 50.1.1.1 0.0.0.03) Configure CE1.# Configure interfaces[CE1] vlan 202[CE1-vlan202] port gigabitethernet 2/1/2[CE1-vlan202] quit[CE1] interface Vlan-interface 202[CE1-Vlan-interface202] ip address 12.1.1.1 255.255.255.0[CE1-Vlan-interface202] ospf cost 100[CE1-Vlan-interface202] quit[CE1] vlan 201[CE1-vlan201] port gigabitethernet 2/1/1[CE1-vlan201] quit[CE1] interface Vlan-interface 201[CE1-Vlan-interface201] ip address 10.1.1.1 255.255.255.0[CE1-Vlan-interface201] ospf cost 1# Configure OSPF.[CE1] ospf 100 router-id 10.10.10.129[CE1-ospf-100] import-route direct[CE1-ospf-100] area 0.0.0.0[CE1-ospf-100-area-0.0.0.0] network 10.1.1.0 0.0.0.255[CE1-ospf-100-area-0.0.0.0] network 12.1.1.0 0.0.0.2554) Configure CE2# Configure interface.[CE2] vlan 202[CE2-vlan202] port gigabitethernet 2/1/2[CE2-vlan202] quit[CE2] interface Vlan-interface 202
