Operation Manual – Multicast ProtocolH3C S9500 Series Routing Switches Chapter 8 MSDP Configuration8-23[SwitchE-ospf-1-area-0.0.0.0] network 10.1.1.1 0.0.0.0[SwitchE-ospf-1-area-0.0.0.0] network 10.26.1.2 0.0.0.0[SwitchE-ospf-1-area-0.0.0.0] quit[SwitchE-ospf-1] quit# Configure BGP.[SwitchE] bgp 100[SwitchE-bgp] undo synchronization[SwitchE-bgp] group in internal[SwitchE-bgp] peer 10.25.1.1 group in[SwitchE-bgp] peer 10.27.1.2 group in[SwitchE-bgp] peer in connect-interface loopback0[SwitchE-bgp] ipv4-family multicast[SwitchE-bgp-af-mul] peer in enable[SwitchE-bgp-af-mul] peer 10.25.1.1 group in[SwitchE-bgp-af-mul] peer 10.27.1.2 group in[SwitchE-bgp-af-mul] peer in next-hop-local[SwitchE-bgp-af-mul] quit[SwitchE-bgp] group ex external[SwitchE-bgp] peer 10.29.1.1 group ex as-number 300[SwitchE-bgp] peer ex default-route-advertise[SwitchE-bgp] peer ex ebgp-max-hop 255[SwitchE-bgp] ipv4-family multicast[SwitchE-bgp-af-mul] peer ex enable[SwitchE-bgp-af-mul] peer 10.29.1.1 group ex[SwitchE-bgp-af-mul] peer ex next-hop-local[SwitchE-bgp-af-mul] quit[SwitchE-bgp] quit# Configure MSDP peer, Mess Group and Originating RP.[SwitchE] msdp[SwitchE-msdp] peer 10.29.1.1 connect-interface loopback 0[SwitchE-msdp] static-rpf-peer 10.29.1.1[SwitchE-msdp] peer 10.25.1.1 connect-interface loopback 0[SwitchE-msdp] peer 10.27.1.2 connect-interface loopback 0[SwitchE-msdp] peer 10.25.1.1 mesh-group net[SwitchE-msdp] peer 10.27.1.2 mesh-group net[SwitchE-msdp] originating-rp loopback0[SwitchE-msdp] quit[SwitchE] ip route-static 10.29.1.1 255.255.255.0 Vlan-interface20# Configure C-RP and BSR.[SwitchE] pim[SwitchE-pim] c-rp loopback 10
