Operation Manual – MPLSH3C S9500 Series Routing Switches Chapter 4 MPLS L2VPN4-8[H3C-Vlan-interface214] ip address 5.5.5.1 24[H3C-Vlan-interface214] mpls[H3C-Vlan-interface214] quit# Configure the local connection.[H3C] ccc local-conn interface vlan-interface 211 outgoing-interfacevlan-interface 213# Configure a static LSP, with the out-label of 100 and the egress interface being theinterface of VLAN 214.[H3C] mpls[H3C-mpls] static-lsp ingress PEA-PEB l2vpn nexthop 5.5.5.2 out-label 100# Configure a static LSP, with the in-label of 211 and the ingress interface being theinterface of VLAN 214.[H3C-mpls] static-lsp egress PEB-PEA l2vpn incoming-interface vlan-interface214 in-label 211# Configure the remote connection.[H3C] ccc remote-connection interface vlan-interface 212 transmit-lsp PEA-PEBreceive-lsp PEB-PEA2) Configure PE-B.# Enable MPLS globally.[H3C] mpls lsr-id 10.0.0.1[H3C] mpls# Enable MPLS L2VPN globally.[H3C] mpls l2vpn# Configure VLAN 211.[H3C] vlan 211[H3C-vlan211] port gigabitethernet 2/1/1[H3C] interface vlan-interface 211[H3C-Vlan-interface211] quit# Enable MPLS on the interface of VLAN 212.[H3C] vlan 212[H3C-vlan212] port gigabitethernet 2/1/2[H3C-vlan212] quit[H3C] interface Vlan-interface 212[H3C-Vlan-interface212] ip address 6.6.6.1 24[H3C-Vlan-interface212] mpls# Configure a static LSP, with the out-label of 200 and the egress interface being theinterface of VLAN 212.[H3C-mpls] static-lsp ingress nexthop 6.6.6.2 out-label 200
