Operation Manual – System ManagementH3C S9500 Series Routing Switches Chapter 3 Device management3-8III. Configuration procedure1) Configure the switch# Log into the switch through the console port locally or through telnet remotely (refer tothe getting start module for details about the login modes).# Enable FTP on the switch; configure a username, password and path.[H3C] ftp server enable[H3C] local-user switch[H3C-luser-switch] service-type ftp ftp-directory flash:[H3C-luser-switch] password simple hello2) Run the FTP client program on the PC to set up an FTP connection with the switch.Then upload the switch program switch.app to the flash root directory on theswitch and download the configuration file config.txt from the switch. The FTPclient program is not provided along with the switch, so, it is for you to purchaseand install it.Caution:If the Flash Memory on the switch is not sufficient, delete the original applicationprogram in the flash before uploading the new one into the flash of the switch.3) After uploading, performs upgrading on the switch.# You can use the boot boot-loader command to specify the new file as the applicationprogram on the next booting and reboot the switch to implement the upgrading of theapplication program. boot boot-loader primary flash:/switch.app slot 0 reboot
