H3C S9500 Series Operation Manual

Also see for S9500 Series: Operation manual Operation manual Operation manual Operation manual Operating manual

Contents

Operation Manual – Multicast ProtocolH3C S9500 Series Routing Switches Chapter 9 MBGP Multicast Extension Configuration9-119.2.13 Configuring MBGP Route FilteringThe route filtering configuration of MBGP is the same as that of unicast BGP.For details, refer to “BGP Configuration” of the Routing Protocol part.9.2.14 Resetting BGP ConnectionsAfter changing the MBGP policy or protocol configuration, users must disconnect thepresent BGP connection to make the new configuration effective.For details, refer to “BGP Configuration” of the Routing Protocol part.9.3 Displaying and Debugging MBGP ConfigurationAfter the above configuration, execute display commands in any view to display therunning information of MBGP, and to verify the effect of the configuration.Execute the debugging command in user view for the debugging of MBGP.Table 9-14 Displaying and debugging MBGP configurationOperation CommandDisplay an MBGP routing table display bgp multicast routing-table[ ip-address [ mask ] ]Display CIDR (classless inter-domainrouting) display bgp multicast routing-table cidrDisplay the routing information aboutthe specified MBGP communitydisplay bgp multicast routing-tablecommunity [ aa:nn |no-export-subconfed | no-advertise |no-export ]* [ whole-match ]Display the routes permitted by thespecified MBGP community listdisplay bgp multicast routing-tablecommunity-list community-list-number[ whole-match ]Display the routes with inconsistentsource autonomous systemsdisplay bgp multicast routing-tabledifferent-origin-asDisplay the routing information to orfrom a specified multicast neighbordisplay bgp multicast peer[ peer-address ] [ verbose ]Display the routing informationadvertised by MBGP display bgp multicast networkDisplay the peer group information display bgp multicast group[ group-name ]Display the AS path informationmatching the AS regular expressiondisplay bgp multicast routing-tableregular-expression as-regular-expressionDisable/enable debugging MBGPUPDATE packets[ undo ] debugging bgp mp-update[ receive | send ] [ verbose ]