Checkpoint FRU/actionE1F6 (Determine boot devicesequence) 1. Go to “Checkout procedure” on page 38.2. System board and chassis.E1F7 (No boot image located) v Go to “Boot problem resolution” on page 153.E1F8 (Building boot device list forSCSI adapters. (The location code ofthe SCSI adapter being scanned isalso displayed.))1. Go to “Checkout procedure” on page 38.2. System board and chassis.E1F9 (Building boot device list forfibre-channel adapters. (The locationcode of the SAN adapter beingscanned is also displayed.))1. Go to “Checkout procedure” on page 38.2. System board and chassis.E1FC (Building boot device list forSSA adapters. (The location code ofthe SSA adapter being scanned isalso displayed.))1. Go to “Checkout procedure” on page 38.2. System board and chassis.E1FD (E1FD and another progresscode (Exxx) will alternate in theoperator panel. The other code iswhere the error occurred.)1. Go to “Checkout procedure” on page 38.2. System board and chassis.E1FE (Building boot device list forfibre-channel adapters. (The WWPNof the SAN adapter being scanned isalso displayed.))1. Go to “Checkout procedure” on page 38.2. System board and chassis.E1FF (Building boot device list forfibre-channel adapters. (The WWPNof the SAN adapter being scanned isalso displayed.))1. Go to “Checkout procedure” on page 38.2. System board and chassis.E200 (U2 I2C initialization) 1. Go to “Checkout procedure” on page 38.2. System board and chassis.E201 (Flash RAM CRC checksum isvalid) 1. Go to “Checkout procedure” on page 38.2. System board and chassis.E202 (MPIC initialization) 1. Go to “Checkout procedure” on page 38.2. System board and chassis.E203 (Disabling TB) 1. Go to “Checkout procedure” on page 38.2. System board and chassis.E204 (CRC check of the image inRAM) 1. Go to “Checkout procedure” on page 38.2. System board and chassis.E206 (Reenable TB) 1. Go to “Checkout procedure” on page 38.2. System board and chassis.E209 (SIO/COM1/GPIO initialization) 1. Go to “Checkout procedure” on page 38.2. System board and chassis.E20A (Loading 256K flash code intoL2 cache) 1. Go to “Checkout procedure” on page 38.2. System board and chassis.Chapter 10. Symptom-to-FRU index 99
