The number after the colon is a sequence number thatcorrelates this data with any diagela data with the samesequence number. The end of the extended data is marked bythe lineAug 27 12:16:33 larry kernel: RTAS: 15 ----- RTAS event end -------with the same sequence number.Word 13 and word 19 are found in the RTAS messages. Forexample, to find word 13, first find the error code in the leftcolumn of words of the extended data, 10117661. In thisexample, we find the error code to the right of RTAS 4:. This isalso word 11. To get word 13, 10110000, count the words left toright, beginning at word 11.Step 002 If you performed substep 2 on page 41 of Step 001, record anyRTAS messages found in the Linux Syslog (platform log) in Step001. If you performed substep 2 on page 41 of Step 001, recordany RTAS and diagela messages found in the Linux Syslog(platform log) in Step 001, and also record any extended datafound in the RTAS messages, especially word 13 and word 19.Ignore all other messages in the Linux Syslog (platform log).Step 003 Examine the Linux boot (IPL) log by logging in to the system as theroot user and entering the following command:cat /var/log/boot.msg |grep RTAS |moreLinux boot (IPL) error messages are logged into the boot.msg fileunder /var/log. The following illustration shows an example of theLinux boot error log.RTAS daemon startedRTAS: -------- event-scan begin --------RTAS: Location Code: U0.1-F3RTAS: WARNING: (FULLY RECOVERED) type: SENSORRTAS: initiator: UNKNOWN target: UNKNOWNRTAS: Status: bypassed newRTAS: Date/Time: 20020830 14404000RTAS: Environment and Power WarningRTAS: EPOW Sensor Value: 0x00000001RTAS: EPOW caused by fan failureRTAS: -------- event-scan end ----------Step 004 Record any RTAS messages found in the Linux boot (IPL) log inStep 003. Ignore all other messages in the Linux boot (IPL) log.Step 005 If you performed substep 3 on page 42 of Step 001 for thecurrent Linux partition, go to Step 006 on page 45, and whenasked in Step 006, do not record any additional extended datafrom Step 004 for the current Linux partition. Examine theextended data in both logs.The following is an example of the Linux extended data.44 BladeCenter JS20 Type 8842: Hardware Maintenance Manual and Troubleshooting Guide
