IBM JS20 - BladeCenter - 8842 Maintenance And Troubleshooting Manual

Also see for BladeCenter JS20: Configuration and options guide Installation and user guide Installation and user guide

Contents

ServicerequestnumberSRNsource Description FRU/actionA13-12x G A non-critical error has been detected, anerror on system bus. 1. Check the BladeCenter management moduleevent log; if an error was recorded by thesystem or if a checkpoint code is displayed onthe console, see Chapter 10,“Symptom-to-FRU index,” on page 93.2. If no entry is found, replace the system board.A13-13x G A non-critical error has been detected, anI/O expansion bus parity error. 1. Check the BladeCenter management moduleevent log; if an error was recorded by thesystem or if a checkpoint code is displayed onthe console, see Chapter 10,“Symptom-to-FRU index,” on page 93.2. If no entry is found, replace the system board.A13-13x G A non-critical error has been detected, anI/O expansion bus parity error. 1. Check the BladeCenter management moduleevent log; if an error was recorded by thesystem or if a checkpoint code is displayed onthe console, see Chapter 10,“Symptom-to-FRU index,” on page 93.2. If no entry is found, replace the system board.A13-14x G A non-critical error has been detected, anI/O expansion bus time-out error. 1. Check the BladeCenter management moduleevent log; if an error was recorded by thesystem or if a checkpoint code is displayed onthe console, see Chapter 10,“Symptom-to-FRU index,” on page 93.2. If no entry is found, replace the system board.A13-14x G A non-critical error has been detected, anI/O expansion bus time-out error. 1. Check the BladeCenter management moduleevent log; if an error was recorded by thesystem or if a checkpoint code is displayed onthe console, see Chapter 10,“Symptom-to-FRU index,” on page 93.2. If no entry is found, replace the system board.A13-15x G A non-critical error has been detected, anI/O expansion bus connection failure. 1. Check the BladeCenter management moduleevent log; if an error was recorded by thesystem or if a checkpoint code is displayed onthe console, see Chapter 10,“Symptom-to-FRU index,” on page 93.2. If no entry is found, replace the system board.A13-16x G A non-critical error has been detected, anI/O expansion unit not in an operatingstate.1. Check the BladeCenter management moduleevent log; if an error was recorded by thesystem or if a checkpoint code is displayed onthe console, see Chapter 10,“Symptom-to-FRU index,” on page 93.2. If no entry is found, replace the system board.A13-50x G Recoverable errors on resource indicatea trend toward an unrecoverable error.However, the resource could not bedeconfigured and is still in use. Thesystem is operating with the potential foran unrecoverable error.1. If repair is not immediately available, rebootand the resource will be deconfigured;operations can continue in a degraded mode.2. Check the BladeCenter management moduleevent log for an entry around this time. If noentry is found, replace the system board.Chapter 10. Symptom-to-FRU index 135