Error code FRU/action20D0000F (self-test failed on device;error and/or location codeinformation may not be available)1. If a location code is specified, replace the device at that location.2. Go to “Checkout procedure” on page 38.20D00010 (self-test failed on device,can’t locate package) 1. If a location code is specified, replace the device at that location.2. System board and chassis.20D00011 (run-time extractionservices (RTAS) program attempt toallocate memory failed)1. Go to “Checkout procedure” on page 38.2. System board and chassis.20D008xx (failure to access VPDdata where xx of: 0E, 0F = machinetype or model; 10, 11 = system serialnumber; 16, 17 = universal uniqueidentifier (UUID); 1E = startup (boot)mode)1. Go to “Checkout procedure” on page 38.2. System board and chassis.20D00900 (failure to generateuniversal unique identifier (UUID)value)1. Replace memory.2. System board and chassis20D00901 (failure to communicatewith service processor) 1. Update service processor firmware.2. System board and chassis.20D00902 (server starting frompermanent (B) firmware code page) 1. If choice was specifically selected, informational only.2. If choice was not specifically selected:a. Recover firmware (see “Recovering the system firmware code” onpage 54).b. Go to “Checkout procedure” on page 38.20D10004 (failed to locate serviceprocessor device tree node) 1. Go to “Checkout procedure” on page 38.2. System board and chassis.20D10005 (failed to reboot) 1. Go to “Checkout procedure” on page 38.2. System board and chassis.20D10006 (failed to reboot apartition) 1. Go to “Checkout procedure” on page 38.2. System board and chassis.20D10007 (partition firmware errorbefore console was ready) 1. Go to “Checkout procedure” on page 38.2. System board and chassis.20D1000A (failed to send boot failedmessage to service processor) 1. Go to “Checkout procedure” on page 38.2. System board and chassis.20D10010 (stack underflow fromfiber channel adapter) 1. Update microcode for fiber channel adapter, if available.2. Go to “Checkout procedure” on page 38.3. System board and chassis.20EE000B (system was not able tofind an operating system on thedevices in the boot list)v Go to “Boot problem resolution” on page 153.20EE000F (unable to find thepackage node) 1. Go to “Checkout procedure” on page 38.2. System board and chassis.20EE0010 (unable to execute theroot vpd method) 1. Go to “Checkout procedure” on page 38.2. System board and chassis.Chapter 10. Symptom-to-FRU index 103
