IBM JS20 - BladeCenter - 8842 Maintenance And Troubleshooting Manual

Also see for BladeCenter JS20: Configuration and options guide Installation and user guide Installation and user guide

Contents

ServicerequestnumberSRNsource Description FRU/actionA1D-07x G A non-critical error has been detected,:Internal service processor firmware erroror incorrect version.1. Check the BladeCenter management moduleevent log; if an error was recorded by thesystem or if a checkpoint code is displayed onthe console, see Chapter 10,“Symptom-to-FRU index,” on page 93.2. If no entry is found, replace the system board.A1D-08x G A non-critical error has been detected,another internal service processorhardware error.1. Check the BladeCenter management moduleevent log; if an error was recorded by thesystem or if a checkpoint code is displayed onthe console, see Chapter 10,“Symptom-to-FRU index,” on page 93.2. If no entry is found, replace the system board.A1D-09x G A non-critical error has been detected, aservice processor error accessing vitalproduct data EEPROM.1. Check the BladeCenter management moduleevent log; if an error was recorded by thesystem or if a checkpoint code is displayed onthe console, see Chapter 10,“Symptom-to-FRU index,” on page 93.2. If no entry is found, replace the system board.A1D-12x G A non-critical error has been detected, aservice processor error accessing fansensor.1. Check the BladeCenter management moduleevent log; if an error was recorded by thesystem or if a checkpoint code is displayed onthe console, see Chapter 10,“Symptom-to-FRU index,” on page 93.2. If no entry is found, replace the system board.A1D-13x G A non-critical error has been detected, aservice processor error accessing athermal sensor.1. Check the BladeCenter management moduleevent log; if an error was recorded by thesystem or if a checkpoint code is displayed onthe console, see Chapter 10,“Symptom-to-FRU index,” on page 93.2. If no entry is found, replace the system board.A1D-18x G A non-critical error has been detected, aservice processor detected NVRAM error. 1. Check the BladeCenter management moduleevent log; if an error was recorded by thesystem or if a checkpoint code is displayed onthe console, see Chapter 10,“Symptom-to-FRU index,” on page 93.2. If no entry is found, replace the system board.A1D-19x G A non-critical error has been detected, aservice processor error accessing realtime clock/time-of-day clock.1. Check the BladeCenter management moduleevent log; if an error was recorded by thesystem or if a checkpoint code is displayed onthe console, see Chapter 10,“Symptom-to-FRU index,” on page 93.2. If no entry is found, replace the system board.A1D-20x G A non-critical error has been detected:Service processor error accessing scancontroller/hardware.1. Check the BladeCenter management moduleevent log; if an error was recorded by thesystem or if a checkpoint code is displayed onthe console, see Chapter 10,“Symptom-to-FRU index,” on page 93.2. If no entry is found, replace the system board.Chapter 10. Symptom-to-FRU index 139