IBM JS20 - BladeCenter - 8842 Maintenance And Troubleshooting Manual

Also see for BladeCenter JS20: Configuration and options guide Installation and user guide Installation and user guide

Contents

ServicerequestnumberSRNsourceFailingFunctionCode Description and action651-612 G D01 External cache ECC single-bit error.651-613 G D01 External cache ECC single-bit error.651-614 G 214 System bus time-out error.651-615 G 292 Time-out error waiting for I/O.651-619 G Error log analysis indicates an error detected by the CPU. Action: Usefailing function codes and the physical location codes from the diagnosticproblem report screen to determine the FRUs.651-621 G 2C6 ECC correctable error Action: Use Chapter 4, “Problem determinationprocedures for AIX and Linux,” on page 21.651-623 G 2C6 Correctable error threshold exceeded Action: Use Chapter 4, “Problemdetermination procedures for AIX and Linux,” on page 21.651-624 G 214 Memory control subsystem internal error.651-625 G 214 Memory address error (invalid address or access attempt).651-626 G 214 Memory data error (bad data going to memory).651-627 G 214 System bus time-out error.651-628 G 210 System bus protocol/transfer error.651-629 G 210 Error log analysis indicates an error detected by the memory controller.Action: Use Chapter 4, “Problem determination procedures for AIX andLinux,” on page 21.651-632 G 308 Internal device error.651-639 G 210 Error log analysis indicates an error detected by the I/O. Action: Use theproblem determination procedure and failing function codes, use thephysical location codes from the diagnostic problem report screen todetermine the FRUs.651-640 G 2D5 I/O general bus error.651-641 G 2D6 Secondary I/O general bus error.651-642 G 2D3 Internal service processor memory error.651-643 G 2D3 Internal service processor firmware error.651-644 G 2D3 Other internal service processor hardware error.651-659 G 2CD ECC correctable error. Action: Use Chapter 4, “Problem determinationprocedures for AIX and Linux,” on page 21.651-65A G 2CE ECC correctable error. Action: Use Chapter 4, “Problem determinationprocedures for AIX and Linux,” on page 21.651-65B G 2CC ECC correctable error. Action: Use Chapter 4, “Problem determinationprocedures for AIX and Linux,” on page 21.651-664 G 302 Correctable error threshold exceeded. Action: Use Chapter 4, “Problemdetermination procedures for AIX and Linux,” on page 21.651-665 G 303 Correctable error threshold exceeded. Action: Use Chapter 4, “Problemdetermination procedures for AIX and Linux,” on page 21.651-666 G 304 Correctable error threshold exceeded. Action: Use Chapter 4, “Problemdetermination procedures for AIX and Linux,” on page 21.651-669 G 2CD Correctable error threshold exceeded. Action: Use Chapter 4, “Problemdetermination procedures for AIX and Linux,” on page 21.651-66A G 2CE Correctable error threshold exceeded. Action: Use Chapter 4, “Problemdetermination procedures for AIX and Linux,” on page 21.Chapter 10. Symptom-to-FRU index 113