Procedure1. Turn on the server.Note: Approximately 1 to 3 minutes after the server is connected to ac power,the power-control button becomes active.2. When the prompt Setup is displayed, press F1.3. From the Setup utility main menu, select Boot Manager.4. Select Add Boot Option; then, select USB Storage. Press Enter, and then selectEsc.5. Select Change Boot Order and then select Commit Changes; then, press Enter.6. Select Save Settings and then select Exit Setup.ResultsIf the embedded hypervisor flash device image becomes corrupted, you can usethe VMware Recovery CD that comes with the server to recover the flash deviceimage. To recover the flash device image, complete the following steps:1. Turn on the server.Note: Approximately 1 to 3 minutes after the server is connected to ac power,the power-control button becomes active.2. Insert the VMware Recovery CD into the CD or DVD drive.3. Follow the instructions on the screen.For additional information and instructions, see the VMware ESXi Server 31Embedded Setup Guide at http://www.vmware.com/pdf/vi3_35/esx_3i_e/r35/vi3_35_25_3i_setup.pdfUsing the remote presence capability and blue-screen captureThis topic provides instructions for using the remote presence capability andblue-screen capture.About this taskThe remote presence and blue-screen capture features are integrated functions ofthe integrated management module (IMM).The remote presence feature provides the following functions:v Remotely viewing video with graphics resolutions up to 1600 x 1200 at 85 Hz,regardless of the system statev Remotely accessing the server, using the keyboard and mouse from a remoteclientv Mapping the CD or DVD drive, diskette drive, and USB flash drive on a remoteclient, and mapping ISO and diskette image files as virtual drives that areavailable for use by the serverv Uploading a diskette image to the IMM memory and mapping it to the server asa virtual driveThe blue-screen capture feature captures the video display contents before the IMMrestarts the server when the IMM detects an operating-system hang condition. Asystem administrator can use the blue-screen capture to assist in determining thecause of the hang condition.Chapter 6. Configuration information and instructions 215
