806f0007-0301ffff [ProcessorElementName] has Failed with IERR.Explanation: IMM has detected processor 1 failed - IERR condition.May also be shown as 806f00070301ffff or 0x806f00070301ffffSeverity: ErrorAlert Category: CriticalServiceable: YesCIM Information: Prefix: PLAT and ID: 0042SNMP Trap ID: 40Automatically notify Support: NoUser response:1. Make sure that the latest levels of firmware and device drivers are installed for all adapters and standard devices,such as Ethernet, SCSI, and SAS. Important: Some cluster solutions require specific code levels or coordinatedcode updates. If the device is part of a cluster solution, verify that the latest level of code is supported for thecluster solution before you update the code.2. Run the DSA program for the hard disk drives and other I/O devices.3. (Trained service technician only) Replace microprocessor 1.806f0007-0302ffff [ProcessorElementName] has Failed with IERR.Explanation: IMM has detected processor 2 failed - IERR condition.May also be shown as 806f00070302ffff or 0x806f00070302ffffSeverity: ErrorAlert Category: CriticalServiceable: YesCIM Information: Prefix: PLAT and ID: 0042SNMP Trap ID: 40Automatically notify Support: NoUser response:1. Make sure that the latest levels of firmware and device drivers are installed for all adapters and standard devices,such as Ethernet, SCSI, and SAS. Important: Some cluster solutions require specific code levels or coordinatedcode updates. If the device is part of a cluster solution, verify that the latest level of code is supported for thecluster solution before you update the code.2. Run the DSA program for the hard disk drives and other I/O devices.3. (Trained service technician only) Replace microprocessor 2.806f0007-0301ffff • 806f0007-0302ffffAppendix B. Integrated management module error messages 437
